Cosmotech Philippines, Inc.
7761 St. Paul Street, San Antonio Village, Makati City, Philippines Makati City, NCR 1203
Phone: (+632) 403-9811 to 20
All Products Conference and Control System Creator Control System

Creator Control System

Integrate the Creator Control System with other structures to create a fully functional system like a projection and control system.



Know more about the Conference & Control System

Installation and Application of Conference and Control System

Communication plays a very important role in the corporate business nowadays. Big and small companies invest a great amount of money on effective communication media. One example of communication media is the Conference and Control System, this system plays a vital role in the corporate world.

Read more


Model: Light Current Relay Card
(CRKJ8)

  • 8 built-in light current relay interfaces
  • Light-current relay ports- 8 terminal blocks with normally open and isolated relays.
    Each relay is rated 0.3A/ 125V-AC, 0.3A/ 110V-DC or 1A/30V-DC
  • Power Supply- Supplied by expansion slot

Model: 4 Channels Dimmer
(CRLITE-4A)

  • Isolated Control Channels: 4 channels
  • Load Ratings: Per channels: 1200 Watts; Total 3400 Watts
  • Power Requirement: AC Line: 220V, 50Hz AC
  • Control Ports: CR-NET Port: 1 terminal block of CR-Net bus
  • Power Supply: 24VDC supplied by CR-NET bus
  • Dimension: 200L x 155W x90H (mm)
  • Weight: 3.5 kg

Model: Scaler Switcher
(MAX1301-HD-B)

  • Design for multi-signals processing. Signals of composite video,
    YPbPr/YcbCr, S-video, VGA and HDMI format and switched out. New generation has added
    HDMI in/out; more suitable to the increasing AV market where high resolution signal prevails.
  • LCD Display: Real-time monitor of the operating status
  • Control mode: RS-232, infrared, panel control
  • Resolution: support 480P, 720P,1080i, 1080p, and XGA, SXGA, SXGA+, WXGA
  • Adopting the gain-compensation and synchronization signal proofread technology
  • Power fail protection
  • Rack-mountable enclosure
  • Dimension: 483L x 230Wx 44H (mm)
  • Weight: 1.9kg

Model: Programmable
Controller (CR-PGMII)

  • Up to 210 MHz, 32-bit embedded processor. Internal 8M SDRAM and 2M flash
    allow it to execute intricate calculation of logic instruction
  • Provide customer with an open programmable control platform,
    personalized operation interface and mutual control structure
  • Powerful programmable embedded interfaces make it has a capability
    to control almost the third party devices
  • Users can build their IR code bank which supports logical controls such as one key for 2 IR codes,
    or download the latest one from CREATOR website conveniently.
  • CR-PGM11 supports 3 CR-NET control buses, which could be expanded up to 256 control modules
  • Ethernet control can be achieved by connecting it to the LAN with expansion card
  • Embedded IR Learning Function
  • Circuit Board protection function

Model: Programmable
Network Communication
Controller (CR-PGMIII)

  • Adopt language programming, convenient application
  • With WIFI Control, the integration of the popular apple products
    for human-computer interaction, such as iPhone, iPad and iTouch
  • Network cascade connection, provide with network interlink control
  • Download and upload program through Ethernet
  • Three kinds of network communication: CR-NET, CR-LINK, Ethernet
  • CR-Link-Creator high speed BUS port, for connecting to
    Creator-developed CR-LINK device
  • Built-in IR Learner, easy tuning and maintenance
  • 8 independent programmable infrared transmitter ports support to control
    multiple the same or different IR Devices
  • 8 independent programmable RS-232/422/485 control ports the user
    could program various of control protocols and codes
  • 8 relay ports
  • 8 digital signal input/ output ports
  • USB 2.0 programmable communication port
  • Support a variety of local and remote control

Model: 4 Channels Power
Controller (CRPWR-4)

  • Isolated Control Channels: 4 channels
  • Load Ratings: 20 Amps per channel
  • Control Ports: CR-NET Port: 1 terminal block of CR-Net bus
  • Power Supply: 24 VDC supplied by CR-Net bus
  • Dimension: 190L x 153W x50H (mm)
  • Weight: 2.7 kg

Model: 8 Channels Power
Controller (CRPWR-8II)

  • Isolated Control Channels: 8 channels
  • Load Ratings: 20 Amps per channel
  • Control Ports: CR-NET Port: 1 terminal block of CR-Net bus
  • Power Supply: 24 VDC supplied by CR-Net bus
  • Dimension: 226L x 153W x50H (mm)
  • Weight: 2.7 kg

Model: HDBASET CAT5 Matrix
(CR-UCAT5 AV200T)

  • Supports HDM11.3a, compatible with HDCPI.3
  • Support DVI-D input, compatible with DVI1.0
  • Supports Video, S-Video, YPbPr(YCbCr), VGA(RGBHV) input
  • Support analog stereo inpu, output, HDMI digital audio input, output
  • Support two-way infrared, RS-232 transmission
  • Through serial command or panel code to change the output resolution
  • Through serial command or panel button to select a video source
  • Support video scaling, noise reduction, de-interlacing, adjustment of brightness and contrast, resolution can be up-scaled to 1920x1080P @60
  • Support simultaneous transmission of video, audio, IR and RS-232. The maximum transmission distance of CAT5e/6 shielding cable is up to 100M.

Model: Fiber Signal Extender
(CR-USF-DVI-200R)

  • Support single core multi-mode fiber transmission of high resolution of DVI signal
  • Support transmission of Audio signal, IR signal and RS-232 signal
  • Transmission distance is up to 300M

Model: Matrix AV0108

  • Can distribute 1 AV input into 8 AV outputs. Cutting-edge circuit design
    has been applied to ensure the quality of the transmitted audio and visual signals.
    It can mainly applied in broadcast and television project, multimedia conference room,
    large-screen display project, television education and command control center, etc.
  • RCA Interface
  • 150MHz(-3Db), Fully Loaded
  • Available in 1×8 sizes
  • Aluminum alloy chassis with illuminating crystal buttons
    for much more convenient operation
  • Precise PCB design
  • TDK power supply
  • Filter power supply interface

Model: Matrix AV0404

  • Support to be remotely controlled by PC via Ethernet
  • Available in 4×4 sizes
  • Rs485 extended control keyboard supported
  • Composite Video Supported
  • Both simultaneous and separate switching of Audio and Video inputs supported
  • Channels switching authorization supported
  • Maximally 8 users supported for simultaneous remote control by PC via Ethernet
  • Aluminum alloy chassis with illuminating crystal buttons
    for much more convenient operation
  • Precise PCB design
  • Double COM Interface
  • TDK Power Supply
  • Filter Power Supply Interface

Model: Matrix AV0808

  • Input / output: Video and Audio on RCA jack
  • LCD Display: Real-Time monitor of the operating status
  • Compatible with Video
  • Switching type: Vertical Interval
  • Gain: 0Db
  • Video Impedance: 75 Ω
  • Video Type: NTSC3,58,NTSC4.43, PAL, SECAM
  • Stereo Channel Separation:>80Db @ 1kHz
  • CMRR: >90Db @ 20 Hz to 20 KHz
  • Switching Speed: 200ns (Max)
  • 150MHZ(-3Db) Bandwidth, fully loaded
  • 10 global presets
  • Power-fail protection
  • Rack-mountable enclosure
  • Universal international power supply ( 110VAC-240VAC, 50/60HZ)
  • Enclosure Dimension: W482.6Xh310.3x D274
  • Product Weight: 3.5 kg

Model: Matrix V1604

  • 16 x04 Video Matrix Switcher
  • Support to be remotely controlled by PC via Ethernet
  • Rs485 extended control keyboard supported
  • Composite Video Supported
  • Channels switching authorization supported
  • High-bandwidth processing, up to 150Mhz @ -3Db(fully loaded)
  • Aluminum alloy chassis with illuminating crystal buttons
    for much more convenient operation
  • Precise PCB Design
  • Double COM interface
  • TDK Power supply
  • Filter power supply interface

Model: Matrix VGA0108

  • Available in 1×8 sizes
  • Can convert and distribute VGA input into 8 VGA output.
  • Supported signal: RGBHV, RGBS, RGsb, RsGsBs
  • 250MHz (-3Db), Full-bandwidth
  • Signal distortion compensation in long distance transmission
  • Optional input impedance (75 Ω), for better compatibility
  • Precise PCB Design
  • TDK Power Supply
  • Filter Power Supply Interface

Model: Matrix VGA0801

  • Support to be remotely controlled by PC via Ethernet
  • Available in 8×1 sizes
  • Supported signal types: RGBHV, RGBS, RGsB, RsGsBs
  • Rs485 extended control keyboard supported
  • Both simultaneous and separate switching of Audio and Video inputs supported
  • Channels switching authorization supported
  • High-bandwidth processing, up to 350MHz @ -3Db(fully loaded)
  • Maximally 8 users supported for simultaneous remote control by PC via Ethernet
  • Aluminum alloy chassis with illuminating crystal buttons
    for much more convenient operation
  • Precise PCB Design
  • Double COM Interface
  • TDK Power Supply
  • Filter Power Supply Interface

Model: Matrix VGA0802

  • Video Inputs: 15-pin HD Female port
  • Video Output: 15-pin HD Female port
  • Control Port: RS232, female 9-pin D connector
  • Compatible with component video, RGBHV, RGBS, RGsB, RsGsBs, HDTV
  • 250 Mhz (-3Db) bandwidth, full loaded
  • 10 global presets
  • Adopting the gain-compensation and synchronization signal proofread technology
  • Power-fail protection
  • Rack-mountable enclosure
  • Universal International Power Supply (110V-240V)

Model: Integrated Matrix Switcher
Control System (PC-6500)

  • PC-6500 is designed on the basis of PGM II and PC multi-media control system series.
    The programmable control system has not only AV/VGA matrix switcher interface of PC series,
    but also the programmable capability with multi-control ports. Also, it adopts
    the infrastructure of PGM II host, which is able to meet the needs
    of large and medium sized project at utmost.
  • CPU: 32-bit Samsung ARM
  • Processing Speed: 210 MIPS
  • Standard Memory: 8M SDRAM and 8M Flash
  • Extendable Memory: Totally up to 32M
  • Video/Audio Matrix Switcher Module: 6 inputs x2 outputs
  • VGA Switcher Module: 3 inputsx 1+1 outputs for projectors viewing and PC signal monitoring
  • Isolated Input Signals: 1 Microphone and 2 audio interfaces
  • Power Supply: Universal International Power Supply (110V-240V)
  • Dimension: 485Lx236Wx100H(mm)
  • Weight: 4.5kg
  • Support wireless/ wired touch panels, control panels and keypads
  • Embedded IR Learning function

Model: ST-6500C

  • TFT LCD Screen with 320 * 240 pixels
  • Touch range: 12 bit A/D module and not more than 0.5mm allocation error
  • Visible angle: Horizon±60° Vertical ±35°
  • Display function in both Chinese and English
  • Wireless communications with the controller
  • Standby delay, off delay, Network ID, volume and screen brightness can be adjusted
  • USB communication port

Model: ST-7600C

  • Processor: CPU: 32 bit Samsung ARM, processing speed : 208MHz
  • Memory: Internal 96M SDRAM, 64M Flash
  • Touch Screen Display
  • Display type: TFT LCD
  • Display size: 800×480 resolution
  • Touch range: 7 inch diagonal (12 bit A/D module and not more than 0.5 allocation error)
  • Height/ Width contrast: 16:9
  • Brightness: 350 cd/m2
  • Contrast: 250:1
  • Display Color: 262k (18bit, 262, 144)
  • Visible angle: Horizon ±60° Vertical: ±35°
  • Button: 3D and animation button

Model: Touch AV Professional
Control System

  • The touch AV is designed on the basis of PGM II and PC multi-media
    control system series. The programmable control system has not only AV/VGA
    matrix switcher interface of PC series, but also the programmable capability
    with multi-control ports. Also, it adopts the infrastructure of PGM II host,
    which is able to meet the needs of large and medium sized project at utmost.
    USB Connection – it is more steady and efficient to download program.
  • CPU: 32-bit Samsung ARM
  • Processing Speed: 210 MIPS
  • Standard Memory: 8M SDRAM and 8M Flash
  • Extendable Memory: Totally up to 32M
  • AV Matrix Switcher Module: RCA connector, 6 inputs x2 outputs
  • VGA Switcher Module: 3 inputsx1 .1 outputs for projecting viewing
    and PC signal monitoring
  • Isolated input signals: 1 Microphone signal and 2 PC audio signals
  • Supporting wireless/ wired touch panels, control panel and keypads
  • Embedded IR Learning function
  • Enclosure: metal case, rack mountable
  • Power Supply: Universal International Power Supply (110V-240V)
  • Dimension: 485Lx171Wx45H(mm)
  • Weight: 2.2kg

Model: VGA S2

  • Inputs: 1 VGA input on female 15-pin HD
  • Outputs: 2 parallel VGA output on female 15 pin HD
  • 250 MHz(-3Db)bandwidth, fully loaded
  • Power Supply: 220V, 50Hz
  • Dimension: 173Lx110Wx40H(mm)
  • Weight: 0.6kg

Model: VGA S4

  • Inputs: 1 VGA input on female 15-pin HD
  • Outputs: 4parallel VGA output on female 15 pin HD
  • 250 MHz(-3Db)bandwidth, fully loaded
  • Power Supply: 220V, 50Hz
  • Dimension: 173Lx110Wx40H(mm)
  • Weight: 0.6kg
Back To Top